Alcatel OmniSwitch/Router Guía de usuario descargar pdf (Pagina 74)

Using FTP Logging Into the Switch

page 2-10 OmniSwitch 6250/6450 Switch Management Guide May 2012

Using FTP

The OmniSwitch can function as an FTP server. Any standard FTP client may be used.

Note. An FTP connection is not secure. Secure Shell is recommended instead of FTP or Telnet as a secure

method of accessing the switch.

Using FTP to Log Into the Switch

You can access the OmniSwitch with a standard FTP application. To log in to the switch, start your FTP

client. Where the FTP client asks for “Name”, enter the IP address of your switch. Where the FTP client

asks for “User ID”, enter the username of your login account on the switch. Where the FTP client asks for

“Password”, enter your switch password.

You can use the switch as an FTP client in a case where you do not have access to a workstation with an

FTP client. You can establish an FTP session locally by connecting a terminal to the switch console port.

You can also establish an FTP session to a remote switch by using a Telnet session. Once you are logged

into the switch as an FTP client, you can use standard FTP commands.

You can use the switch ftp command to start an FTP session followed by the relevant IP address or host-

name, and the ftp6 command to start an FTPv6 session followed by relevant IPv6 address or hostname

over an IPv6 environment. You have to specify the name of the particular IPv6 interface, if the target has

been specified using the link-local address.

Note. If you are using Authenticated Switch Access (ASA), the port interface must be authenticated for

FTP use and the username profile must have permission to use FTP. Otherwise the switch does not accept

an FTP login. For information about ASA, refer to Chapter 10, “Managing Switch Security.”

The following is an example of how to start an FTP session to an OmniSwitch with an IP address of

198.23.9.101.

->ftp 198.23.9.101

Connecting to [198.23.9.101]...connected

220 cosmo FTP server (UNIX(r) System V Release 4.1) ready

Name:

You need to enter a valid user name and password for the host you specified with the ftp command, after

which you will get a screen similar to the following display:

Name:Jsmith

331 Password required for Jsmith

Password: *****

230 User Jsmith logged in.

The following is an example of how to start an FTPv6 session to an OmniSwitch with an IPv6 address of

fe80::a00:20ff:fea8:8961.

-> ftp6 fe80::a00:20ff:fea8:8961 intf1

Connecting to [fe80::a00:20ff:fea8:8961]...connected

220 cosmo FTP server (UNIX(r) System V Release 4.1) ready

Name:

1 2 ... 69 70 71 72 73 74 75 76 77 78 79 ... 345 346

Sin comentarios

Alcatel OmniSwitch/Router Guía de usuario Pagina 74