Alcatel OS6400-24 Guía de usuario descargar pdf (Pagina 84)

Monitoring the Chassis Booting OmniSwitch 6400 Series Switches

page 4-4 OmniSwitch 6400 Series Hardware Users Guide July 2010

Checking the Fan Status

To check the current status for all six fans in the chassis, use the show fan command. For example:

-> show fan

Chassis Fan Status

-------+---+-----------

1 1 Running

1 2 Running

For a complete list of output definitions for this command, refer to the OmniSwitch CLI Reference Guide.

Checking the Power Supply Status

For information on checking power supplies for OmniSwitch 6400 Series switches, refer to show power.

Additional Monitoring Commands

Using LEDs to Visually Monitor the Chassis

The front panel of OmniSwitch 6400 Series switches provides status LEDs that are useful in visually

monitoring the status of standalone switches, as well as switches stacked into a virtual chassis.

For detailed information on all OmniSwitch 6400 Series LEDs, refer to page 2-20.

CLI Commands Used for Monitoring a Chassis

show cmm Displays the basic hardware and status information for primary and

secondary management modules (if applicable).

show ni Displays the basic hardware and status information for individual mod-

ules. If the switch is a standalone, information for the stand alone

switch displays.

show module Displays the basic information for individual modules. If the switch is a

standalone, information for the stand-alone switch displays.

show module long Displays the detailed information for individual modules. If the switch

is a standalone, information for the standalone switch displays.

show module status Displays the basic status information for individual modules. If the

switch is a standalone, information for the standalone switch displays.

1 2 ... 79 80 81 82 83 84 85 86 87 88 89 ... 151 152

Sin comentarios

Alcatel OS6400-24 Guía de usuario Pagina 84