Alcatel SpeedTouch Speed Touch Home Asymmetric Digital Subscriber Line (ADSL) Modem Guía de usuario descargar pdf (Pagina 22)

2 SpeedTouch™ Installation

E-SIT-CTC-20030702-0003 v4.0

6 The installer copies the necessary files to your computer.

7 The following screen appears:

Click OK to proceed.

8 At the end of the procedure, the following window appears:

Click Restart to finish the installation and restart your computer.

The hardware

installation procedure

After restarting your computer, proceed as follows:

1 Use the ADSL cable provided to wire the SpeedTouch™ ADSL port to your tele-

phone wall outlet or distributed filter.

2 Insert the SpeedTouch™'s USB connector into the computer's USB port.

A USB port can be easily located, it is marked with the typical USB symbol: .

Note You can also connect your SpeedTouch™ to the computer via a USB

hub.

3 On the Apple menu, point Control Panels and click Modem:

4 The Modem control panel appears

Make sure the SpeedTouch™ is selected in the Connect via list and Modem list.

Note If you are using an RFC1483 Bridged connection you may only have to

adjust the Modem list selection.

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 63 64

Sin comentarios

Alcatel SpeedTouch Speed Touch Home Asymmetric Digital Subscriber Line (ADSL) Modem Guía de usuario Pagina 22