
September 2009
Page 54 of 79 OmniSwitch 6400/6850/6855/9000/9000E—Release 6.4.2.R01
SNMP Traps
The following table provides a list of SNMP traps managed by the switch.
No. Trap Name Platforms Description
0 coldStart all The SNMP agent in the switch is reinitiating
and itsk configuration may have been altered.
1 warmStart all The SNMP agent in the switch is reinitiating
itself and its configuration is unaltered.
2 linkDown all The SNMP agent in the switch recognizes a
failure in one of the communications links
configured for the switch.
3 linkUp all The SNMP agent in the switch recognizes that
one of the communications links configured for
the switch has come up.
4 authenticationFailure all The SNMP agent in the switch has received a
protocol message that is not properly
authenticated.
5 entConfigChange all An entConfigChange notification is generated
when a conceptual row is created, modified, or
deleted in one of the entity tables.
6 aipAMAPStatusTrap all The status of the Alcatel-Lucent Mapping
Adjacency Protocol (AMAP) port changed.
7 aipGMAPConflictTrap — This trap is not supported.
8 policyEventNotification all The switch notifies the NMS when a significant
event happens that involves the policy manager.
9 chassisTrapsStr all A software trouble report (STR) was sent by an
application encountering a problem during its
execution.
10 chassisTrapsAlert all A notification that some change has occurred in
the chassis.
11 chassisTrapsStateChange all An NI status change was detected.
12 chassisTrapsMacOverlap all A MAC range overlap was found in the
backplane eeprom.
13 vrrpTrapNewMaster all The SNMP agent has transferred from the
backup state to the master state.
14 vrrpTrapAuthFailure — This trap is not supported.
15 healthMonDeviceTrap all Indicates a device-level threshold was crossed.
16 healthMonModuleTrap all Indicates a module-level threshold was crossed.
17 healthMonPortTrap all Indicates a port-level threshold was crossed.
18 /jointfilesconvert/396187/bgpEstablished all The BGP routing protocol has entered the
established state.
19 /jointfilesconvert/396187/bgpBackwardTransition all This trap is generated when the BGP router port
has moved from a more active to a less active
state.
20 esmDrvTrapDropsLink all This trap is sent when the Ethernet code drops
the link because of excessive errors.
21 pimNeighborLoss all Signifies the loss of adjacency with a neighbor
device. This trap is generated when the neighbor
time expires and the switch has no other
neighbors on the same interface with a lower IP
Comentarios a estos manuales