Alcatel OS6850-48 Guía de usuario Pagina 106

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 192
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 105
OmniSwitch 6850 Series Power Supplies OmniSwitch 6850 Series Chassis and Hardware Components
page 2-82 OmniSwitch 6850 Series Hardware Users Guide April 2010
3 Carefully slide the power supply against the back of the chassis until the power connector connect.
4 If you have installed the power shelf tighten the captive screws (or screws) located at back of the power
supply to the power shelf.
Connecting a Power Supply with a Cable
The following sections describe how to rack-mount a power supply shelf and connect the power supply
with a cable.
Power Supply Shelf Rack Mounting Steps
Follow the steps below to rack-mount the power supply shelf:
1 Align the threaded holes in the provided rack-mount flanges with the two holes in the power supply
shelf. These holes are located on the left and right sides of the shelf.
2 Attach the flanges to the chassis using the provided Phillips-head screws. The screws slide through the
non-threaded holes from the inside of the power supply shelf and are then attached to the mounting brack-
ets using the threaded holes. Be sure to tighten each of the screws firmly using a Phillips screwdriver.
Attaching a Rack-Mount Flange
Vista de pagina 105
1 2 ... 101 102 103 104 105 106 107 108 109 110 111 ... 191 192

Comentarios a estos manuales

Sin comentarios